Ivoclar Vivadent 747827AA, Руководство по эксплуатации

Страница: 17 / 80

17
1
2
Step 3:
Mounting the furnace head
The complete furnace head is best mounted with the rear panel of
the furnace pointing towards the user. Lift the furnace head with
both hands (see picture) and carefully position it on the furnace head
mounting.
Step 4:
Connections
Connect the cables of the furnace head with the furnace base.
Proceed as follows:
– Connect the vacuum hose (53).
– Insert the thermocouple plug (51). (Make sure that the polarity of
the plug is correct.)
– Insert the heater plug (49).
1. Insert the heater plug in the intended socket.
2. Secure the heater plug by rotating it 45° until it snaps into place.
Position the furnace head mounting as shown in
the picture until the furnace head audibly snaps
into place. Make sure that the firing plate or the
insulation is not damaged by mounting the
furnace head.
51
53
49
4. Installation and Initial Start-Up