IVIE MPS 2300, Руководство пользователя

Страница: 35 / 48

lvie Technologies
MPS 2300
Maintenance
& Service
The unit can be cleaned with a soft cloth and a mild non-
abrasive cleaning solution, such as Windex. Avoid cleaning
powders and scrubbing pads, as these will scratch and dull
the finish. Be sure to unplug the unit orior to cleaning. Do
not apply liquid directly to the surface. Dampen the cloth
with the cleaning solution and wipe gently. You may wish to
buff the surface lightly with a dry soft cloth. Cleaning.
After prolonged use, especially in dusty environments or in
fan-cooled racks, the heat sinks may become clogged with
dust. This will interfere with cooling, leading to higher
temperature operation and reduced life. Dust build-up can
be most easily removed by directing an air jet between the
fins of the heat sinks, which are located inside the vented
area on the top left side of the chassis.
Dust Removal.
User Maintenance. There are no periodic “tune-up”
adjustments required. The unit should provide stable
performance until parts fail from age. Internal servicing
must be referred to qualified personnel. The amplifier may
be inspected for loose screws on the outside. If any loose
parts rattle around on the inside when the amp is turned
over in all directions, please have it serviced immediately,
as a loose part could lodge in a dangerous place and
cause further damage or shock hazard.
User Maintenance.
If the amplifier isn’t working properly, please consult the
Obtaining Service.
troubleshooting chart in Section Four. If proper operation
cannot be restored, the amplifier may require service. This
must be performed by qualified technical personnel, to
avoid shock hazard or improper repairs. If service should
be required, please contact the lvie Technologies,
Customer Service Department at (801)766-7600 or
return the unit directly to the lvie factory in Lehi, Utah.
Please note that the Series Two warranty does not cover
repairs made by non-authorized service personnel.
Improper repairs may void future warranty coverage
If the unit is returned to the factory for service, it must be
sent in the original type shipping carton. If you have not