IVIE MPS 2300, Руководство пользователя

Страница: 26 / 48

lvie Technologies
MPS 2300
Installation
and Set up
Leave 2 to 3 inches clearance around sides, back and top
to ensure adequate ventilation. Make sure the shelf itself is
well mounted and ventilated.
Shelf Mounting.
Remove four (4) screws holding front panel ends on each
side. Replace with rack mounting brackets. Do one end at a
time to keep front panel in position. Mount in rack.
Rack Mounting.
When mounting more than one unit be sure to separate by
at least one (1) rack space to assure adequate ventilation.
Use of ventilated spacer panel is recommended. Fan
cooling the rack is advised for heavy duty usage and/or
high ambient temperature conditions.
The front panel can be customized for each application
using the following:
Knob Lock-out Plug - can be used to replace any
front panel control knob. Remove knobs by pulling
straight out, using padded pliers if necessary. Replace
with Lock-out Plugs for these situations:
Lock-out Paae and Music Volumes and use
Master Volumes to change overall volume,
keeping page and music levels at the same
relative levels.
Lock-out Master Volume and use Page and Music
Volumes to change music and page levels
independently.
Lock-out Master Volume and Paae or Music
Volumes to change only music or page level while
fixing the level of the other.
Master EQ and Music Source Assignment can
also be locked out as desired.
Site Specific Labels- a sheet of self-adhesive
alternate names for sources and destinations is
provided in order to label the front panel and/or
remote control in terms the user will understand. Make
sure the surface is free from oil and dirt before
Front Panel Set-up.
Knob Lock-out Plug.
Site Specific Labels.