DIGISPENSE 3020 CONTROLLER MODULE
Page 3-5
7 April, 2011
IVEK Corp.
P03L011B
3.1.1.4 Active/Start LED (Figure 3.1 Item 4)
The Active/Start LED illuminates when the pump is operating and blinks when a fault occurs.
3.1.1.5 Stop Push-button (Figure 3.1 Item 5)
This push-button stops the pumping operation. The LED above the push-button illuminates when the pump is stopped.
3.1.1.6 Idle/Stop LED (Figure 3.1 Item 6)
The Idle/Stop LED illuminates when the pump is stopped or idle.
3.1.1.7 Arrow Push-buttons (Figure 3.1 Item 7)
The Arrow Push-buttons move the cursor on the display and are used to change values.
3.1.1.8 Enter Push-button (Figure 3.1 Item 8)
The Enter Push-button has two functions; the first function selects a value to change that has been highlighted using
the arrow push-buttons, the second function stores the changed value in the Controller Module.
3.1.2 Rear Panel Detail (Figure 3.2)
The rear panel contains the interface connections for controlling the system. The following components are located on
the rear panel.
1. Fan
5. AUX COMM Connector
2. AUX OUT Terminal Strip
6. LOGIC I/O Connector
3. CC TRIG Terminal Strip
7. MOTOR Connector
4. RS232 Connector
8. Power Entry Module
1
4
5
2+
2-
3+
3-
8
7
6
Figure 3.2 Digispense 3020 Controller Module Rear Panel
