Iveco C78 ENT M50, Инструкция по установке

Страница: 22 / 40

C78 ENT M50 INSTALLATION INSTRUCTIONS
6
FEBRUARY 2003 EDITION
TECHNICAL DATA FOR INSTALLATION
Engine intake and ventilation air when underway
Static vacuum allowed downstream of the air filter kPa
≤
3
mmH
2
O
≤
300
Engine air intake flow rate m 3 /h
≥
1785
Engine room ventilation air flow rate m 3 /h
≥
9000
Static vacuum allowed in the engine room kPa
≤
0,1
mmH
2
O
≤
10
Temperature allowed in the engine room °C
≤
50
Exhaust gas discharge
Optimum static back pressure kPa
≤
7
mmH
2
O
≤
700
Allowed static back pressure kPa
≤
10
mmH
2
O
≤
1000
Temperature at maximum power °C 480
Flow rate at maximum power Kg/h 1900
Riser outer diameter mm (inches) 153 (6)
Dry exhaust outer diameter mm (inches) 114 (4,5)
Diameter of circumference of distance between 6 locking holes mm (inches) 150 (5,9)
Fuel supply
Transfer pump delivery at maximum rpm Kg/h
≤
88
Flow rate return to tank kg/h
≤
12
Fuel temperature to allow maximum power °C
≤
78
Inner diameter, intake pipe mm 8
Inner diameter, return pipe mm 8
Thread on pre-filter junctions M 14 x 1,5
Thread on engine junctions inches UIC 1/2
Open sea water cooling line
Intake pipeline diameter mm (inches) 60 (2,36)
Pump delivery at maximum rpm l/h 17500
Sea water pump height above sea level m
≤
2
Allowed intake vacuum kPa 20
mmH
2
O 2000
Discharge pipeline diameter mm (inches) 50 (2)
Inverter oil heat exchanger
thread on engine junctions inches UIC 1/2
Angle of inclination of the engine under continuous operation conditions
Longitudinal ( dynamic) degrees/360
≤
25
Starboard side or port side ( dynamic) degrees/360
≤
22,5