ThunderION_UM_9752160010_NL_D_GB_F_V2_2
30
3. Technical specifications
Power supply
Supply voltage
21 – 27 V DC stabilized
*
Max. current consumption 0.7 A DC
Connection
Hirschmann GO6WF connector
Output
Output voltage
Max. 30 kV positive and negative
Short-circuit protection
Output electronically protected at max. output current
Max. current from emitter
to earth
<0.7 mA
Emitter material
Special alloy
Environment
Operating environment Industrial
Ambient temperature
0 – 55°C
Cooling Convection
Operating distance
300 – 1000 mm
Local functions
Frequency setting
1…10 Hz in 1 Hz increments; can be adjusted using the
rotary switch behind the PG-7 stopper.
(Standard 5 Hz, position 4)
Indication of pulse
frequency setting
Flashing red and yellow LEDs during start-up of the bar
and after adjustment of the pulse frequency.
[On] signalling
Yellow LED
[Fault] signalling
- Red LED lights up in the case of an overload or
short circuit.
- Red LED flashes when a repeated or
continuous overload or short circuit has occurred.
Remote functions
Remote On/Off
Switching high voltage on and off
Control voltage specifications:
10 V DC, 10 mA min.
30 V DC, 25 mA max.
Bar operating OK
Indicates that the bar is operating correctly
(when high voltage is switched on).
Max. load: 30 V DC, 50 mA.
Mechanical
Effective bar length
250 mm to 4000 mm
Dimensions (WxHxL)
47 mm x 93 mm x total length (Eff. 205 mm)
Weight
0.8 kg + 1.5 kg/m
Housing
Glass-fibre strengthened plastic
Mounting material
Brackets and connector
* The power supply must be a Limited Power Supply or NEC Class 2 power supply.
The output of the power supply must be properly grounded! (See para. 4.4.1.)
An LPS certified power supply has a limited output power, as a result of which it
always generates a safe output voltage.
