CGW-I Cellular Gateway BRI-GSM : Installation and Operation Manual
16
LCD Messages
Description
Action
No Name NoSig
If there is no signal and the name of the
operator is not available.
No Name is displayed when the Name value
is selected in LCD Operator Display (see
page 29).
Check
antenna
location. See
Reception
Level, pg 48.
No Num. NoSig
If there is no signal and the number of the
operator is not available.
No Number is displayed when the Number
value is selected in LCD Operator Display
(see page 29).
Check
antenna
location. See
Reception
Level, pg 48.
Calling -XXX
When an outgoing call is being made,
Calling and the 2-3 digit signal level is
displayed.
Ring At Dst –XXX
When an outgoing call is ringing at the
destination number, Ring At Dst and the 2-3
digit signal level are displayed.
Ringing –XXX
When an incoming call is ringing, Ringing
and the 2-3 digit signal level are displayed.
Connected -XXX
When a call is connected, Connect and the
2-3 digit signal level are displayed.
Disconnecting –XXX
When a call is being disconnected,
Disconnecting and the 2-3 digit signal level
are displayed.
Busy -XXX
When an outgoing call is dialed and the
number is busy, Busy and the 2-3 digit signal
level are displayed.
Drawer Open
The SIM drawer is open.
Close the
drawer
ISDN Error
No Sync
There is a synchronization error.
Check
physical cable
from NT
source to
Synch-In port.
ISDN Error
Interface Failure
The is an error with the ISDN interface
communication.
Reset the
ISDN.
ISDN Error
No Link
There is no link to the PBX.
Check
physical cable
from NT
source to the
device.
Error: Pin Code
Displayed when you enter the incorrect SIM
code in the GUI.
Enter the
correct PIN or
disable the
PIN code.
Error: Puk Code
When an incorrect PIN is entered and the
card is locked, you must call the network
operator to get the correct PUK code to
unlock the code.
Call your
network
operator to
get the PUK
code.
