CGW-I Cellular Gateway BRI-GSM : Installation and Operation Manual
41
Field Parameter
Beep in the last
The number of minutes before your Prepaid Time credit is
finished that the system will begin beeping (once each
minute) to alert you that a SIM’s discounted time is almost
finished.
Range: 0-99
Controlling the CGW-I
The System menu includes a number of options for resetting, clearing and
closing your CGW-I device. To choose one of these options, select: System
@
Control. The options are described below:
Function Description
Reset Device
Performs a reset on your device if it stops responding. When
your device is reset, all temporary data is lost (i.e., counters
and MSN Routing Links).
Reset GSM Channel
Resets the engine of the selected channel (1 or 2) if channel
stops responding.
Reset ISDN Interface
Resets communications protocol between device and ISDN
layers 1, 2, and 3.
Cellular Daily Restart
Allows you to set a time for a daily cellular engine restart to
be performed automatically by the unit for each of the two
channels.
Gentle Closing
Prevents any new connections to be made on any channel.
Any current connection will remain open until the call is
ended. After doing a gentle close, you must select
Reset
Device
to use it again.
Echo Parameters
Echo parameters influences on the audio quality. This
parameter changes the system hardware’s interactivity with
the firmware. Echo Parameter argument can be 0 , 1 and 2,
where
[0] Supports with the Cellular Module Q24CL001/002 &
Q2686
[1] Supports with the Cellular Module Q24CL002 &
Q2686
[2] Support with the Cellular Module Q2686 Only
Note: ‘Echo Parameters’ can be changed by the qualified
technical person only. Changing ‘Echo Parameters’ takes
effect on the Cellular Gateway functionality.
Back to Factory
Defaults
Resets all parameters to their default settings.
