ITS Partner O.B.S S.L · Av. Cerdanyola 79-81 Local C
08172 Sant Cugat del Vallés · Barcelona (Spain)
Phone: +34935839543 · [email protected] · www.ek.plus
CM 8SH-TC
USER MANUAL
Address and port of the data server which facilitates the
remote connection.
It is configured by default. DO NOT CHANGE.
FAQS
•
What loads can be used for the module?
Use isolated loads
type
•
How many services can be installed on a MUX output?
It depends on the size o
f the channel selected in the “Program Pool”. For HD channels less
channels can be installed than for SD channels.
•
Why does the head-end module not detect anything?
Set the FA 524 to the left. Connect the head-end module to the right. Plug the power to the FA
524, connect a USB cable to the PC and open the CM MANAGEMENT program.
Press the USB button and it will connect to the module.
•
Why is there no signal at the tuner input?
Check the orientation of the satellite dish and the LNB with the
•
If the MER (Modulation Error Rate) is located next to the power socket, can it be improved?
For installations where there are problems with the MER (Modulation Error Rate), an improved
performance of the product can be obtained, in the event that it has been attenuated at the
head-end, leaving the attenuator at 0dB in the CM Management, and adding an external
attenuator at the head-end output until the same attenuation is obtained.
