ITS Partner O.B.S S.L · Av. Cerdanyola 79-81 Local C
08172 Sant Cugat del Vallés · Barcelona (Spain)
Phone: +34935839543 · [email protected] · www.ek.plus
CM 8SH-TC
USER MANUAL
Input card:
In this part of the menu the input card will be configured. Selecting A, B, C, D, E, F, G or H in order to
choose the input tuner that is to be configured:
On:
Click on “Check” to activate the selected tuner
.
Input: Select one of the physical inputs, 1, 2, 3 or 4.
Polarity: HOR. - VER. Select the horizontal or vertical polarity.
Switch: if having a DiSEqC multiswitch then select between A, B, C or D.
If there is no DiSEqC multiswitch, this will not affect the selected value.
Common fields for each of the four physical inputs 1-2-3 and 4.
Standard: Select DVB-S or DVB-S2 for the satellite input.
BIS. (MHz): Tuner frequency. The conversion is performed automatically.
Example: 11229 MHz
–
9750 = 1479MHz
S.R.: Symbol Rate of the selected MUX.
Once the parameters have been correctly configured, the signal will be acquired, acquired and an
approximate value of these parameters will be specified in Power (Level) and C/N (Quality). The power
in dBm and the quality in dB CANNOT BE CONSIDERED AS A PROFESSIONAL MEASUREMENT.
Several fields for the eight different satellite inputs. A-B-C-C-D-E-F-G and H.
Input I: HDMI
–
USB 2.0
By selecting input
I
(1), the
HDMI - USB 2.0 input can be configured.
The HDMI input is automatic, it will always work with a maximum resolution of
1080p. Check the
Technical Specifications
of the equipment.
The USB input can be configured to be enabled at an interval of hours, and at
the end of the time, it will automatically return to the HDMI input.
The USB input works with videos in TS output format. Click on the drop-down
menu
(2)
to select the video.
, software, and where the video can be
generated using the TS extension.
Link:
https://ek.plus/en/sw/ek-converter-en
