215.0V
OUTPUT VOLT
Fig. 3-5
3.2.2 System Parameter Setting
After system power-on, press the CIRCLE button to view the LCD
display. When the LCD screen displays “BACK TO MAIN MENU”,
press the ENTER button to return to the main menu. Again press the
CIRCLE button, when the LCD screen displays “FUNCTION
SETUP”, as shown in Fig. 3-6, press and hold the ENTER button for
more than 5 seconds to enter the function setup state. User may set
according to the actual UPS configuration the equalize charge
function, temperature compensation function, battery capacity (the
aforesaid setup is needed only for long backup time UPS, that of
standard UPS had been completed at factory), master/slave/single
and alternate operation time (this step is saved for single-unit
system). See Section 1.5.2 for detailed information.
Chapter 3 Operation 27
E1-20010916-C-1.0
