Chapter 2 Installation
2.1 Unpacking Inspection
1. Open the packing box and take out the UPS, be careful not to
drop it as it is heavy.
2. Check whether the UPS has been damaged in transport. In the
event of any damage to the UPS, please notify the distributor for a
check and don’t turn it on.
3. Check the accessories against the delivery accessory list, please
contact the distributor if any accessory is missing.
2.2 Installation
2.2.1 Matters Needing Attention
1. Please place the UPS on the even ground near load.
2. The distance from the rear and side panels of the UPS to the wall
or other equipment should be greater than 20cm, and the air inlets
on the front panel and at the bottom of the UPS should be kept
unblocked, so as to facilitate ventilation and heat dissipation.
Otherwise, the UPS internal temperature will rise, which will shorten
UPS lifetime.
3. Install the UPS in environment with good ventilation, avoid
installing it in environment with excessive temperature or humidity,
keep the UPS away from water, flammable, explosive substances,
corrosive materials, heat source and direct sunlight, and better keep
the air inlet/outlet free of dust.
Chapter 2 Installation 13
E1-20010916-C-1.0
