II. LED display
1) Fault indicator
(red
): shines in the event of fault, and goes off
otherwise.
2) Mains indicator
(green
): shines when the mains is normal, goes off
in the event of mains failure, and flashes when the mains voltage is
outside tolerances.
3) Inverter indicator
(green
): shines when the inverter is supplying
power, and goes off otherwise.
4) Bypass indicator
(green
): shines when the bypass is supplying
power, and goes off otherwise.
5) Battery indicator
(green
): shines when the battery is supplying
power, and goes off otherwise,
III. LCD display
1) Operating parameters
Input voltage, input frequency, output voltage, output frequency,
output current, load, internal temperature, battery residual
capacity/in charge state/full charged, battery voltage/charging
voltage.
2) Alarm information
(listed by order of priority from high to low
)
UPS shutdown, auxiliary supply fault, output short-circuit, inverter
fault, rectifier fault, internal overtemperature, overload, charger fault,
battery fault, UPS shutdown imminent due to low battery, output
fault.
3) Function setup
6 Chapter 1 Product Introduction
E1-20010916-C-1.0
