ITRON ACE6000, Руководство пользователя

Страница: 82 / 85

ACE6000 User Guide
80
RESET_MEASUREMENT_DATA Reset of measurement data
START_MEASUREMENT Start measurement
STOP_MEASUREMENT Stop measurement
START_TRIGGERED_TESTS Start triggered tests
STOP_TRIGGERED_TESTS Stop triggered tests
END_OF_DATA_SAVING End of current data saving
LOAD_PROFILE_RESET Load profile reset
PASSWORD RESTORATION Password restoration
INDEX_CLOCK_LOSS Default clock loss index
SUCCESSFUL COMMUNICATION Successful communication
Note Event Comment
1 PARAMETERS_SAVING Recorded each time new configuration parameters have
been programmed into the meter.
2 AC_FAIL_APPEARANCE
AC_FAIL_DISAPPEARANCE Recorded when a micro power failure (<=1 second) is
detected by the meter, at the same time the state of power
supply backup is checked.
3 PWR_FAIL_APPEARANCE Recorded when the meter cut calculation reaches the
lower threshold, all meter data is then saved.
11.2. Alarm descriptions
The following table contains a list of alarms (these may change due to meter firmware revision):
Non-fatal alarm Type Description
WATCHDOG ACTIVITY Trapped Watchdog
( see note 1 below )
EXTERNAL CLOCK INCOHERENCE Trapped Meter clock programming error
( see note 2 below )
CONFIGURATION INCOHERENCE Trapped Incoherence of configuration parameters
( see note 3 below )
NON VOLATILE MEMORY NON FATAL
ERROR Trapped Checksum error in Flash memory
( see note 1 below )
PROGRAMMING INCOHERENCE Trapped Incoherence of parameters programmed
( see note 4 below )
COVER OPENING Trapped Detection of abnormal use of terminal cover
NO INTERNAL CONSUMPTION Self-healing No internal energy consumed for more than n days
ZERO SEQUENCE U Self-healing
ZERO SEQUENCE I Self-healing
CLOCK LOSS Self-healing Incoherence of internal clock after power cut
( see note 5 below )
NEUTRAL LOSS