manualshive.com logo in svg

Itowa BETON, Руководство пользователя

Поделиться
Скачать
Itowa BETON Скачать руководство пользователя страница 44

SYNTHESIZED SETS 

 

USER MANUAL 

 

 

39

S1 

 

S2 

 

S3 

 

S4 

 

 

 

 

 

 

 ATTENTION:

 PLACE THE TRANSMITTER AT THE BOTTOM OF THE CRANE. 

 

4. If the Stop Button is pressed, it should be released. 

 

5. Press the START button. Keep it pressed and press the STOP BUTTON. Led indicators 

 

and 

 on the transmitter will flash alternately. The receiver will indicate that the new 

working channel is on stand-by: 

 

You now have 60 seconds to enter the new working channel. After this time, the unit will exit the 

programming mode and will keep the previous channel, which will be visualised by means of the leds. 

 

6. Enter the channel number, 27 for example, by pressing the master control or moving the 

joystick corresponding to tens twice and seven times corresponding to units. Press 

VALIDATE. 

 

7. The selected channel is sent to the receiver, which will indicate the new channel by means of 

the leds: 

 

The frequency has been changed correctly. Leds indicators 

 and 

 will have stopped flashing. 

The equipment is ready to start operating. 

 
After changing the working channel, in order to continue operating with the radio control, release the 
emergency stop button (STOP BUTTON) and press the START push button. In the receiver, the stop 
and start relays will activate, and the general contactor will there before be interlocked. At the same 
time, the S1 indicator of the transmitter will turn on indicating that the remote control is operating 
correctly and all manoeuvres can be performed. 
 

NOTE:

 If you have started changing the frequency in manual mode and the push-button is validated 

without having entered the units or tens, the remote control unit will automatically select the first 
channel of the table 

Содержание BETON

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды