manualshive.com logo in svg

Itowa BETON, Руководство пользователя

Поделиться
Скачать
Itowa BETON Скачать руководство пользователя страница 37

SYNTHESIZED SETS 

 

USER MANUAL 

 

 

32 

• 3 pulses of S4 and all the leds flash except S4 until P1 is pressed. 

• 8 pulses of S5 and all the leds flash except S5 until P1 is pressed.  

• 14 pulses of S6 and all the leds flash except S6 until P1 is pressed.  
• The display of the code of the set finishes when P1 is pressed.  

7.2. DISPLAY OF WORKING CHANNEL 

It is important to know the working channel the equipment is working with. This will allow us either to 
change the frequency or to detect interferences of other equipments within the communication of our 
transmitter and receiver. 
Both the transmitter and the receiver can display the working channel, always that the equipment is 
not working. 
 
The following steps will allow us to know the working channel on the transmitter. 

• Unlock the STOP BUTTON. 

• Remove the key/turn off the selector switch or remove the battery. 

• Press the START BUTTON and either turn on the key to on position (maintaining the stop 

button pressed) or insert the battery. 

• When unreleasing the start button the leds 

 and 

 will display the working channel. 

•First the led 

 will blink as many times as tens the working channel has. In case of being  

    zero, the led will not blink. 

•Afterwards the led 

 will blink as many times as units the working channel has. In case of 

    being zero, the led will not blink. 

•Once tens and units have been displayed, the equipment can be started up. 

 

The following steps will allow us to known the working channel on the receiver. 

• Start up the receiver, unreleasing the mushroom head on the transmitter and press start. 

• Release the mushroom head in order the equipment is in stand by. At this moment, the receiver 

will display the working channel by means of the leds (in a similar way the trasmitter display it). 

• First the led 

 will blink as many times as tens the working channel has. In case of being zero, 

  the led will not blink. 

• Afterwards the led 

 will blink as many times as units the working channel has. In case of 

being zero, the led will not blink. 

• If the users tries to start up the equipment while the channel is being displayed, then the display  

  will stop and the equipment will be started. 

• Another way of knowing the working channel is at the moment to give power supply to the 

equipment. After the test of leds the equipment will show the working channel. 

 

After having changed the frequency, both the trasmitter and the receiver will display the working 
channel. 
 

Содержание BETON

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды