PM605KT/PM605KT-B Technical documentation
11
Safety precautions
Preparation Before Installation
Check product
Installation
Maintenance
Appendix
WARNING
At the time of repair and replacement work, turn o
ff
the power to
all connecting devices.
To prevent wraparound for the power circuits and/or signals, shut o
ff
the power,
wait a su
ffi
cient amount of time, and discharge electricity inside the DC power
supply equipment.
At the time of maintenance and inspection, post warning labels
so as to prevent unauthorized persons from turning on the power.
Failure to follow this could result in malfunction and/or unexpected accidents.
If any abnormalities are found, do not use this product until the
causes have been eliminated completely .
Have specialists (or people who have sufficiently acquired
skills) perform maintenance and inspection under
instructions by management supervisors.
Using this product with unattended abnormalities could result in not only
damage to the devices, but also unexpected accidents.
3-4.
Precautions on
maintenance
Precautions on maintenance
CAUTION
3.
Safety precautions
When repairing/replacing, wear protective equipment, such as
gloves.
Failure to follow this could result in hands getting injured by metal parts.
Do not disassemble sections and/or parts other than those
specified.
Failure to follow this could result in malfunction and/or unexpected accidents.
Make sure to prepare repair/replacement parts designated by
ITOH DENKI.
Using parts other than those designated by ITOH DENKI could result in
malfunction.
Original notice - A1.1
