Ithaca ITHERM 280, Руководство программиста

Страница: 237 / 318

* % 8 %.
,
Function Clear buffer(s)
ASCII [DLE] [DC4] <8> d1…d7
Hexadecimal 10H 14H <8> d1…d7
Decimal <16> <20> <8> d1…d7
Range d1=1, d2=3, d3=20, d4=1, d5=6, d6=2, d7=8
Description The [DLE] [DC4] <8> command clears all data stored in the receive buffer and
the print buffer.
Transmits the following three bytes of data
( )
( ) ( )
( ) / %
/ % / %
/ %
Header 37H 55 1 byte
Flag 25H 37 1 byte
NUL 00H 0 1 byte
Enters in standard mode
Function
Select Peripheral Device Status
ASCII [ESC] = <n>
Hexadecimal 1BH 3DH <n>
Decimal <27> <61> <n>
Range 1
≤
n
≤
3
Description The [ESC] = <n> command selects the device to which the host computer sends
data, based on the value of <n> listed below.
-
- -
- 4 '4
4 '4 4 '4
4 '4 ( )
( ) ( )
( ) 5
5 5
5
Off 00H <0> Printer disabled 0
On 01H <1> Printer enabled
Off 00H <0> Customer display disabled 1
On 02H <2> Customer display enabled
2-7 - - - Undefined
Table 53 Peripheral Device Bit Definitions
Note: Epson Customer display is not supported by the iTherm
®
280
printer.