Ithaca ITHERM 280, Руководство программиста

Страница: 225 / 318

* % 8 %.
#
- - - - 4 '4 4 '4 4 '4 4 '4 ( ) ( ) ( ) ( )
0 Off 00H <0> Not used; fixed to off
1 On 02H <2> Not used; fixed to on
2 - - - Undefined
Off 00H <0> Paper is not being fed by the
Button
3
On 08H <8> Paper is being fed by the FEED Button
4 On 10H <16> Not used; fixed to on
Off 00H <0> No paper out stop 5
On 20H <32> Printing stops due to paper out
Off 00H <0> No error 6
On 40H <64> Error occurs
7 Off 00H <0> Not used; fixed to off
Table 42 Off line Status (<n> = 2)
-
- -
- 4 '4
4 '4 4 '4
4 '4 ( )
( ) ( )
( )
0 Off 00H <0> Not used; fixed to off
1 On 02H <2> Not used; fixed to on
Off 00H <0> No mechanical error 2
On 04H <4> Mechanical error occurred
Off 00H <0> No auto-cutter error 3
On 08H <8> Auto-cutter error occurred
4 On 10H <16> Not used; fixed to on
Off 00H <0> Unrecoverable error occurred
12
5
On 20H <32> Recoverable error occurred
6 Off 00H <0> Not used; fixed to off
7 Off 00H <0> Not used; fixed to off
Table 43 Error Status (<n> = 3)
- - - - 4 '4 4 '4 4 '4 4 '4 ( ) ( ) ( ) ( )
0 Off 00H <0> Not used; fixed to off
1 On 02H <2> Not used; fixed to on
Off 00H <0> Paper low sensor: paper adequate 2,3
On (0CH) (<12>) Paper low sensor: paper low
4 On 10H <16> Not used; fixed to on
Off 00H <0> Paper out sensor: paper adequate 5,6
On 60H <96> Paper out sensor: paper not present
7 Off 00H <0> Not used; fixed to off
Table 44 Paper Roll Sensor Status (<n> = 4)
Function Transmit Peripheral Status
ASCII [ESC] u <n>
Hexadecimal 1BH 75H <n>
Decimal <27> <117> <n>
Range n = 0
Description The [ESC] r <n> command transmits peripheral status has been replaced by the
[GS] r command. The iTherm
®
280 return cash drawer status as specified below.
12
The iTherm
®
280does not allow buffer recovery on unrecoverable errors. Following the recovery
process will not restore the data buffers.