Ithaca ITHERM 280 Скачать руководство пользователя страница 264

Страница: 264 / 318

* - .

3 -

&%UB <Name..>& Begin named universal graphic record
IPCL

&%UB <Name..>&

Description The &%UB <Name..>& command initializes the universal graphic buffer

structure, and redirects the following data to the universal graphic buffer.

It uses the <Name..> field as a reference. If the name already exists in

the flash user store, the command is ignored. The command must be

followed by the "End name universal graphic record" command with the

same name. If the data that follows is larger than the universal graphic

buffer (about 16K), the universal graphic definition is terminated without

saving any data.

&%UG <Name..>& End named universal graphic record
IPCL

&%UG <Name..>&

Description The &%UG <Name..>& command ends the universal graphic record

operation and saves the universal graphic to flash. It uses the <Name..>

field to verify the command end and must match the "Begin named

universal graphic record" command. If the name already exists in the

flash user store or the universal graphic memory is exceeded, the

command is invalid, and the <Name..> field prints.

&%UR <Name..>& Run universal graphic data from user store
IPCL

&%UR <Name..>&

Description The &%UR <Name..>& command loads the referenced universal graphic

into the universal graphic buffer. The universal graphic buffer is then

inserted into the data stream. If the named item does not exist or is not a

universal graphic, the iTherm

280 ignores the command.

&%US <Name.. >& Flag item as a start-up universal graphic
IPCL

&%US <Name.. >&

Description The &%US <Name.. >& command flags the referenced item to `be

processed at startup. Only one user character definition and one

universal graphic may be flagged to run at startup.

&%UD <Name..>& Delete item from user store
IPCL

&%UD <Name..>&

Description The &%UD <Name..>&command removes an item from user store and

frees up space. If the item does not exist, the iTherm

280 ignores the

command.

&%UFALL& Flush information from user store
IPCL

&%UFALL&

Description The &%UFALL& command clears all entries in user store and frees the

data space. It must have the name, “ALL” (in uppercase) attached.

Содержание ITHERM 280































































































































































































































































































































Результаты поиска

Содержание ITHERM 280

Отзывы:

Бренды по названию

Популярные бренды

Ithaca ITHERM 280, Руководство программиста

Результаты поиска

Содержание ITHERM 280

Отзывы:

Бренды по названию

Популярные бренды