ITech IT7300 Series Скачать руководство пользователя страница 17

Страница: 17 / 73

Remote Control

Command terminator

Command strings sent to the instrument must end with a <Newline> (<NL>)

character. IEEE-488 EOI (End or Identify) information can be used as <NL>

character to replace termination command string of <NL> character. It is

acceptable to place one <NL> after a <Enter>. Termination of command string

always resets current SCPI command path to root level.

NOTE

As for every SCPI message with one query sent to the instrument, the

instrument will use a <NL> or newline sign (EOI) to terminate response of

return. For example, if "DISP:TEXT?" is sent, <NL> will be placed after

the returned data string to terminate response. If an SCPI message

includes

several

queries

separated

semicolon

(such

"DISP?;DISP:TEXT?"), <NL> will terminate response returned after

response to the last query. In all cases, the program must read <NL> in

response before another command is sent to the instrument, otherwise

errors will be caused.

1.5 Data Type

SCPI language defines several data types used for program message and

response messages.

⚫

Numerical parameter

Commands requiring numerical Parameter support the notations of all common

decimal notations, including optional signs, decimal points, scientific notation,

etc. Special values of numerical Parameter are also acceptable, such as MIN,

MAX and DEF. In addition, suffixes for engineering units can also be sent

together with numerical Parameter (including M, k, m or u). If the command

accepts only some specific values, the instrument will automatically round the

input Parameter to acceptable values. The following commands require

numerical Parameter of frequency value:

[SOURce[1|2]:]FREQuency:CENTer {<Frequency>|MINimum|MAXimum}

⚫

Discrete parameter

Discrete Parameter are used for settings with limited number of programming

values (such as IMMediate, EXTernal or BUS). They can use short and long

format like key words of commands. They may be expressed in both upper and

lower case. The query response always returns uppercase Parameter in short

format. The following commands require discrete Parameter in voltage unit:

[SOURce[1|2]:]VOLTage:UNIT {VPP|VRMS|DBM}

⚫

Boolean parameter

Boolean Parameter refer to true or false binary conditions. In case of false

conditions, the instrument will accept "OFF" or "0". In case of true conditions,

Содержание IT7300 Series










































































Результаты поиска

Содержание IT7300 Series

Отзывы:

Похожие инструкции для IT7300 Series

Бренды по названию

Популярные бренды

ITech IT7300 Series, Руководство по программированию

Результаты поиска

Содержание IT7300 Series

Отзывы:

Похожие инструкции для IT7300 Series

Бренды по названию

Популярные бренды