2
Function and Features
This chapter describes in detail the use of the front-panel keys and shows how
they are used to accomplish instrument operation. This chapter is divided into
the following sections:
♦ Connecting the Device Under Test
♦ Manual testing
♦ Automatic Test (only for IT-E255A)
2.1 Connecting the Device Under Test
Precautions
To prevent electric shock and damage to the instrument, observe the following
precautions.
•
To avoid electrical shock, before testing, please make sure the rating val-
ues of the testing lines, and do not measure the current that higher than
the rating value. All test lines shall be capable of withstanding the maxi-
mum short circuit output current of the power supply without causing
overheat.
•
The quick charger controller is provided with a standard power cord. If
the user needs to replace other power cords, please note the input speci-
fications of the quick charger controller. This will avoid damage to the
instrument.
•
During wiring, check that the anode and cathode of the test lines are
properly and tightly connected.
Specification
Test cables are not standard accessories for the instrument. Please select op-
tional red and black test cables for individual sales based on the maximum cur-
rent value. For specifications of test cables and maximum current values, refer
to the
A.1 Specifications of Red and Black Test Cables
in chapter
for more information.
Copyright © Itech Electronic Co., Ltd.
7
