MULTIMIX 8/4 DIGITAL
www.itec-audio.com
MULTIMIX 8/4 DIGITAL
Provided the configuration of the corresponding Bus signal is set on „ADD-LINK” (see
software description “basic configuration”), the incoming Bus signal will be added to the own
Bus. The summary Bus signal wil then be available again at the link-out socket.
12) Inputs:
The device has 8 symmetrical inputs, which come as XLR-sockets at the housings
rear panel.
Maximum input amplification is at:
Line operation
from
-20
to
+30 dB
Mic operation
from
+10
to
+60 dB
You can determine (switch) any channel for MIC or LINE amplification. This way, any
commercial microphone and playback device can be adjusted perfectly.
NOTE:
Devices delivered before 10. June 2003
have a maximum input amplification of: Line operation from -20 to +20 dB
Mic operation from +10 to +50 dB
Phantom power can be switched individually to each channel, and is a standard 12 Volt. As
an option you can reach either 24 Volt or 48 Volt by means of plug modules
(see chapter 6, voltage supply).
13) Outputs:
Each of the 4 outputs is symmetrical and comes as a XLR plug on the housings rear panel.
The maximum output level is
+20 dB
,
when using the DSP, it is
+10 dB
.
12
