MULTIMIX 8/4 DIGITAL
www.itec-audio.com
MULTIMIX 8/4 DIGITAL
PART 1: HARDWARE DESCRIPTION
FRONT PANEL CONTROLS and DISPLAY
Hardware 2.1
Hardware 1.0 to 2.0
1) Power indicator
4) PC-Interface
2) LED-Display
5) Device Status
3) POTIS 1-8
1) Power indicator:
A red LED shows that the operation voltages are in order.
2) Multifunctional LED display:
Depending on the configuration (see software description), the 8 LEDs have the
following functions:
Off:
LEDs are switched off.
Signal:*
input signal at corresponding input (post-fade) is higher than - 60 dB.
Comp:*
indicates a Compressor/Limiter activitiy on the corresponding input.
Clip:*
input signal at corresponding input (post-fade) is higher than + 3 dB.
Value:
level display for one input or output (one LED is equivalent to 10 dB).
*When running on „Auto-switcher“ the LEDs show the active channels (microphones).
If the display if configured to display a
Value,
you can determine the current level with the
following table:
LED
no
1 2 3 4 5 6 7 8
Value greater or equal
-55dB
-50dB
-40dB -30dB -20dB -10dB -0dB +10dB
6
