MULTIMIX 8/4 DIGITAL
www.itec-audio.com
MULTIMIX 8/4 DIGITAL
The voltage for phantom power on pin 6 is 12 Volt. By using the plug modules
ITEC-MM-Ph-24
and
ITEC-MM-Ph-48
respectively you can achieve higher phantom
voltages.
Attention:
When using 48 Volt phantom voltage, short-circuiting the input signal wires on
ground must be avoided.
8) External control inputs:
15-pole Sub-Min-D-socket on the housings rear panel, called ”EXT.CONTROL“.
volume remote control:
A simple volume remote control becomes possible by using the control inputs
„External“
.
The 8 control inputs can be activated with external potentiometers and a control DC of
0 -10V respectively. It is your choice (see software description) which input channels you
decide to control.
Configuration change:
The same socket houses the control inputs for a configuration switch. External switch
contacts activate one of the 15 predetermined settings.
Socket allocation:
1….External1 9 …External2
2….External3 10…External4
3….External5 11…External6
4….External7 12…External8
5.... +10 Volt 13…GND
6....Config.1 14...Config.2
7....Config.4 15...Config.8
8....GND
8 a) External potentiometer:
EXTERNAL POTENTIOMETERS
Ext pot 1
Ext pot 8
9
