MULTIMIX 8/4 DIGITAL
www.itec-audio.com
MULTIMIX 8/4 DIGITAL
4
SAFETY PRECAUTIONS
The installation and configuration of the
ITEC-Multimix 8/4
must be carried out solely by
trained experts. For the configuration use exclusively the original software
ITEC-MixDesign
.
You must only use the original power supply, which has on its primary side an IEC power
inlet C14 and which is to be connected to the mains socket customary in your country (115 –
230V) with an adequate cable.
When installing the device into a closed cabinet, make sure that there is sufficient air
circulation in order to avoid an inadmissible heating of the device.
When connecting other devices (sound sources, PC), make sure you pay attention both to
the right connection as well as to the input and output specifications.
Do not try to open the device forcefully or by undoing the screw joints. It does not contain any
parts that can be repaired by a layman. In case of problems please contact the manufacturer
or your regional sales office.
By no means must the device be exposed to temperatures above 50°C, humidity above 95%
or rain.
Attention:
unplug the power supply any time the device is opened by an expert.
