The figure below shows how to take In-Range Temps. The Temp-Taker® uses
a proprietary temperature-stability detection algorithm to determine when
the temperature of the probe’s tip has sufficiently stabilized before
producing the temperature reading. This contributes toward generating
fast/accurate Temps.
If the measured temperature is within the established safe zone, an In-Range
event is generated and the event details are saved into non-volatile memory.
At this point the device is ready to Temp another item.
© 2015 ITD Food Safety Inc.
10
Select a Program
then press the
l
key
TIP:
Zone-limit display may be
toggled on/off by pressing the
key
Press the
l
key
to continue
The device is ready to
Temp the next item
Select item, insert probe
tip into product and press
the
l
key to take Temp
The product that was measured is
checked off (i.e. removed from the
list); The list automatically resets
after all products are Temp’d
