Spot-Check Temps mode behaves essentially as a digital thermometer. In
this mode no Temps are recorded. To activate this mode, navigate to the
Spot-Check Temps icon on the Main Menu and press the
l
key (see figure
below). Press the
key to exit Spot-Check Temps.
The figure also shows how to activate and use the temperature statistics
feature of Spot-Check Temps. When this feature is active, every time a new
maximum is ‘seen’ by the probe the LED will flash red and every time a new
minimum is ‘seen’ the LED will flash blue.
Pressing the
key toggles the units between °F and °C. The
pq
keys adjust
the resolution of the display between 1°, 0.1°, and 0.01°. These settings are
independent of the settings used for Take-Temps mode.
© 2015 ITD Food Safety Inc.
14
Navigate to this icon and
press the
l
key to enter
Press the
l
key to
activate statistics
Elapsed time
(mm:ss)
Maximum, average, and
minimum Temp readings
are continuously updated
Press the
l
key to
deactivate statistics
Continuous reading of
probe tip is displayed
