– 65 –
5.2 U
SING AN INTERNAL
PLU
LABEL
ETIK contains three labels ready for merceologic use. They are:
Products label
Partial and General Totals label
Grand Total label
To open and use the Products label click on “
PLU – Build PLU label
”.
To open and use the Partial and General Total label click “
PLU – Build PARTIAL TOTAL label
”.
To open and use the Grand Total label click “
PLU – Build GRAND TOTAL label
”.
All these labels contain the correct sequence of variable fields needed for merceologic use.
You cannot change all their parameters: for example you cannot erase the variable fields, because
they are indispensable for the correct printer operations.
5.3 T
RANSMISSION AND STORING OF DATA TO PRINTER
Be sure printer works in programming mode, that is display is showing:
Witty 2000k
Ready !
Before transmitting data to printer you must open all labels you need at a time and you must
compile the PLU table and the scale parameters.
Click on “
PLU – Download
” to transmit all data (label l PLU table + scale parameters) to
printer.
During programming operations ETIK shows a status window: wait until it has disappeared.
At the end of download printer will save automatically the received data into internal permanent
memory (you will see a message on printer display showing this operation); then printer will come
back to main programming menu and it will be ready for use.
