– 45 –
3.6.10 C
OPYING AN EXISTING
PLU
INTO A NEW ONE
(F5
KEY
)
To add a new PLU into the list you must operate in two times:
A. first of all you must create a duplicate of an existing one
B. then you can modify this new clone
First of all you have to detect and activate a PLU similar to the new one you want to add.
Then press F5 key to make a copy of selected PLU at the end of the list.
If all operations were good, printer will ask you to print ENTER key to activate newly created PLU.
Now you can do on new PLU all changes you need.
If there isn’t memory enough to copy PLU, printer shows the next message:
WARNING!!
Out Of Memory
In this case it is not possible copy any PLU because all memory is used. Press any key to go back to
main PLU menu.
