– 32 –
Variable fields note
Variable fields listed above must always be present into product layouts, even if some of them
aren’t useful and must not be printed.
The lack of some variable field will cause, quite surely, an error during the composition of label.
You can drop into a corner of label all unuseful variable fields: they will be let empty if you have
programmed correctly the PLU table.
3.3 L
ABEL LAYOUTS FOR
“P
ARTIAL
”
AND
“G
ENERAL
” T
OTALS
Layout Z is used by “Partial Total” and “General Total”: this layout cannot be used by PLUs.
All labels for Partial and General Total must contain the following variable fields, with the listed
order:
1.
Type of total (Partial or General)
2.
Product name n° 1
3.
Product name n° 2
4.
Product name n° 3
5.
Product name n° 4
6.
Product name n° 5
7.
Product name n° 6
8.
Product name n° 7
9.
Product name n° 8
10. Product name n° 9
11. Product name n° 10
12. Product name n° 11
13. Product name n° 12
14. Product name n° 13
15. Product name n° 14
16. Product name n° 15
17. Article N° (it’s the number of active PLU)
18. Total of printed labels
19. Total of Net Weight
20. Total of Euro money
21. Barcode
22. Total of national money Amount
3.4 L
ABEL LAYOUTS FOR
“G
RAND
T
OTAL
”
Layout Y is used by “Grand Total”: this layout cannot be used by PLUs.
All labels for Grand Total must contain the following variable fields, with the listed order:
1.
Type of total
2.
Total of printed labels
3.
Total of Net Weight
4.
Total of Euro money
5. Barcode
6.
Total of national money Amount
