manualshive.com logo in svg

ITALMOTO cassia lady, Руководство пользователя

Поделиться
Скачать
ITALMOTO cassia lady Скачать руководство пользователя страница 58

44

TYRES AND WHEELS

Tyres

The approved tyres have been specially 
designed for pedelecs. The use of any 
other type of tyre may result in increased 
rolling resistance and consequently in a 
reduced range. Furthermore, handling 
characteristics, resistance to flats and 
noise may be adversely affected.
Therefore, when replacing the tyres, en-
sure that the new tyres are of the same 
type and size with a suitable tread. If in 
doubt, contact your nearest Italmoto de-
aler.
The reflective strips on the tyre sidewalls 
replace the spoke reflectors in accordan-
ce with legal requirements.
Observe the direction of rotation when fit-
ting a tyre. An arrow on the tyre sidewall 
indicates the direction of rotation.

Further information on tyres and wheels 
can be found in the “Operation” section 
(page 29).

Front and rear wheel

•  Tyres: KENDA
•  ETRTO dimensions: 57-559
•  Dimension inches: 26 x 2.125
•  Pressure: 400 kPa (4,0 bar, 58 psi)

Tyre pressure

The unladen weight given is for the stan-
dard scope of delivery. Accessories and 
items of optional equipment increase the 
unladen weight and reduce the maximum 
payload.

Содержание cassia lady





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды