manualshive.com logo in svg

ITALMOTO cassia lady, Руководство пользователя

Поделиться
Скачать
ITALMOTO cassia lady Скачать руководство пользователя страница 36

22

CHARGING THE BATTERY

Important safety notes

 N

 

DANGER

High voltage is used to charge the battery.
You could get an electric shock if the 
power cable or mains socket is damaged, 
wet or dirty. There is a risk of fatal injury.
•  Only use the charger supplied to char-

ge the battery.

•  Only use a dry charger.
•  Only use an undamaged power cable 

and charger. Immediately replace a 
damaged power cable and charger.

•  Before connecting the charger cable, 

remove any foreign objects, such 
as dirt, ice or snow, from the charge 
socket.

 N

 

WARNING

Using a charger other than the one sup-

plied can cause the battery to overheat. 
There is a risk of explosion.
Only use the charger supplied to charge 
the battery.

 N

 

WARNING

Deep battery discharge can cause an in-
ternal short circuit. The battery heats up 
to an extremely high temperature. There 
is a risk of fire.
•  Avoid deep battery discharge during 

use as well as during storage.

•  When not in use, fully charge the bat-

tery at regular intervals, and at least 
every 6 months.

•  Do not carry a deeply discharged bat-

tery on the e-bike.

•  Only use the battery for the Italmoto 

e-bike.

•  Do not expose the battery to storage 

temperatures below -10°C (14°F) and 

Содержание cassia lady





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды