manualshive.com logo in svg

ITALMOTO cassia lady, Руководство пользователя

Поделиться
Скачать
ITALMOTO cassia lady Скачать руководство пользователя страница 11

a trailer. Riding with a trailer or a trailer 
bike or pulling another bicycle using a bi-
cycle connection system is not permitted.
Always make sure that your Italmoto 
e-bike is
used for the purposes it was designed for.
If the Italmoto e-bike is used in ways for 
which it was not designed, this could re-
sult in
damage to the fitted components. This 
could then lead to accidents and injuries.
The Italmoto e-bike is not intended for 
persons with limited physical, sensory or 
mental abilities. The e-bike is not suitable 
for children under 14 years old.
Taking the battery for your Italmoto e-bike 
on
a passenger plane is not permitted.
Transporting the e-bike with the battery fit-
ted on a vehicle rear-mounted cycle rack 
or roof carrier is not permitted. Remove 

the battery before transporting (page 27). 
Before transporting also remove compo-
nents which are not securely bolted on 
such as, e.g. the control console, Italmo-
tophone and net pockets.

Содержание cassia lady





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды