Italkero QUADRO 40, Руководство по установке и обслуживанию

Страница: 31 / 40

3
MIN 1m
FIRST IGNITION
BEFORE TURNING ON THE APPLIANCE
• Make sure that no person is less than 1m from the
appliance
• Make sure that nothing is less than 1m from the
appliance
• Open the gas tap upstream of the valve
• Make sure that the electrical switch near the valve is
in position "I”
STARTING WITH REMOTE CONTROL
• Orient the remote control towards the IR sensor
• Simultaneously press the “ignition and high flame”
buttons for at least 2” or until hearing a sound (then
release the buttons) that will alerts to receiving of the
signal and the start of the automatic ignition phase that
provides predetermined times to ensure safety:
-- 10” from the start of the spark on the pilot burner,
during the period, sounds will be heard at regular
intervals of 1”
-- When the flame on the pilot burner ignites, the spark
stops igniting (if the flame does not ignite, the flashing
period will be 30” after which it will be necessary to
retry ignition)
-- 20” from the time the pilot flame strikes the safety
thermocouple to obtain ignition of the main burner at
maximum flow rate
WARNING! Not to throw rubbish on or
otherwise to disturb the flue bed.
Flame adjustment
This appliance has a remote control (supplied) with the
Off buttons and flame increase and decrease;
Once switched on, it is possible to choose the power
level of the appliance using the remote control.
- Press the “triangle DOWN” button on the remote
control to reduce the intensity of the flame.
- Press the "UP tr spark” keys to increase the
flame intensity.
Increasing the intensity of the flame through
the use of two keys is a safety measure
designed by the Manufacturer to avoid involuntary
and sudden flames.