Italkero QUADRO 40, Руководство по установке и обслуживанию

Страница: 17 / 40

SUCTION HOOD
This appliance is equipped with an atmospheric burner
with a naked flame TYPE B combustion chamber.
Oxidising air is drawn directly from the room where the
appliance is installed.
To ensure proper flue gas evacuation:
• adequate in the minimum dimensions specified in the
table (Chap. Combustion fumes discharge).
• each side of the hood must protrude 20cm from each
side of the appliance.
• minimum inclination (see table in the Cap. Combusti-
on fumes discharge).
• MIN area of the exhaust pipe must be 255cm
2
.
• the position of the exhaust pipe must be in the center
of the hearth surface.
The appliance should not be installed only in
the center of the hood, it can be decentralized
but always within the area covered by the hood.
GAS
IN
INSTALLER
17