manualshive.com logo in svg

Italkero Poster PE t1 30, Инструкция по установке и техническое руководство

Поделиться
Скачать
Italkero Poster PE t1 30 Скачать руководство пользователя страница 55

TECHNICAL SERVICE ASSISTANCE

Sir...................................................................

......................................................................

Street..............................................................

.......................................................................

Tel..................................................................

15

user

SOLUTION AND PROBLEMS

•

Electrical shortness alimentation.

If you have turned the main switch to the“on”
position and it does not illuminate the button,
be sure that the main electrical cable is insert-
ed in the proper way under the convector.
If there is a problem, call the Technical
Service Assistance.

• Shut down:

-Verifying the tap gas is open.

- Verifying that the combustion is available.

- Verifying that the main cable is inserted in
the proper way.

-To restart the convector, push the trigger
release button. This operation may only be
repeated 2-3 times. If there is a problem, call
Technical Service Assistance.

CLEAN OUT

The only necessary cleaning by the owner is to
clean the cover.

Before effecting:

• It is important that the wall switch and switch
on the control penal is turned to the “off” posi-
tion.

• Wait that the convector gets cold completely.
The only cleaning that is required by the owner,
involves removing the cover, and wiping it
clean the dust, which may have collected.
Do not put grease or lubricants on any parts of
the convector.

For the cover cleaning, use dampened
clothes to do the operation that you want.

Do not allow liquids on the cover or, on
other parts of the convector trying avoid-

ing damages.

MAINTENANCE

The convector maintenance is important for the
efficiency, and the reliability of the radiator.
We recommend that Technical Service Assistance
perform the maintenance once a year.

Содержание Poster PE t1 30

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды