background image

25

CUSTOMER SERVICE

ROUTINE MAINTENANCE

Any type of job done on the appliance must
only  be  performed  by  a  qualified  technician

and AT LEAST ONCE A YEAR.

Cleaning the hearth

- Delicately brush and reposition all the ceramic ele-
ments  and  if  necessary  change  the  damaged  ele-
ments.
- Brush the gas outlet holes (flames) on the burner.

Check the burner and for any gas leaks

-  Make  sure  the  burner  is  clean  and  check  its  inte-
grity.
-  Check  the  gas  outlet  safety  system.  If  necessary
adjust  the  burner.  The  technician  must  also  check
the regulation pressure at the burner inlet.
-  Check  the  existence  of  any  gas  leaks  in  the
system.
- Proceed to check the ignition.

Checking the fireplace.

Check the correct operation of the fume exhaust and
combustion air suction pipes.

The  Appliance  must  only  be  used  for  the
purpose  intended  by  the  Manufacturer  and

for which it was expressly designed and made.
The  Manufacturer  disclaims  any  contractual  and
non-contractual  liability  for  injuries  and  damage
caused to people, animals or things as a result of
the  wrong  installation,  regulation,  maintenance
or improper use of the Appliance.

Spare parts and/or technical jobs require the
prior identification of the model of appliance

to which they refer.
The  tampering,  removal,  lack  of  Technical  Plate,
etc., will not allow the correct identification of the
product and will make installation operations and
subsequent maintenance jobs difficult.

FAULTS AND SOLUTIONS

THE PILOT LIGHT DOES NOT IGNITE OR WORK

-  Make  sure  the  pilot  burner  flame  is  of  the  correct
size for the type of gas used.
- The flame must converge on the thermocouple sen-
sor.
- Make sure the pilot flame has been regulated.

THE MAIN BURNER DOES NOT WORK

- Make sure the pressure and volume of the gas sup-
ply  to  the  appliance  is  adequate.  Check  by  connec-
ting  a  pressure  gauge  to  the  gas  pressure  point  on
the gas valve.
- Ignite the appliance and allow it to operate at maxi-
mum  output.  Close  all  the  other  gas  appliances  in
the house and calculate the quantity of fuel burnt by
reading the meter.

Before  arranging  any  element,  make  sure
burner  combustion  is  correct.  The  flame

must be uniform over the entire burner surface.

THE  PILOT  FLAME  DOES  NOT  IGNITE  OR  DOES
NOT STAY ON

-  Make  sure  the  gas  tap  is  open  on  the  appliance
and on the meter/tank.
-  Keep  the  control  knob  pressed  for  at  least  20
seconds after the ignition of the pilot flame to ensure
operation of the thermocouple safety valve.
-  Make  sure  the  injector  of  the  pilot  burner  is  not
blocked by dust or dirt.
-  Make  sure  the  thermocouple  has  not  been  dama-
ged  during  transport.  This  electromagnetic  device  is
in fact very delicate.
- In case of an LPG fuelled system, make sure there
is gas in the tank.

Содержание Focus 130





























Отзывы: