IRRADIATION AREA
In this unit there are open flames, use a sui-
table shelter for the protection of children,
the elderly and the handicapped.
Maintain a safety distance of at least 1m (1)
between the appliance and objects made of
combustible or inflammable material: wood furni-
ture and furnishings, objects and curtains, etc.
Never move the Appliance close to or in direct
contact with combustible materials, heat-sensiti-
ve materials or inflammable materials; furniture,
beams, ceilings, curtains etc.
Before completing all the covering, always
check: position and fastening of the
Appliance, the definition of all connections (gas
and electricity) and correct operation.
Always provide an easy to remove area on
the opposite side or covering to allow any
inspections, cleaning or repair of hidden areas.
INSTALLATION
Before going ahead with installation, make
sure the data in the Appliance plate corre-
spond to the gas supply type and pressure.
Only skilled personnel should make the gas con-
nections in compliance with applicable regulations.
Make sure the gas supply pipe is of suitable
capacity and that it features an easy-to-access
on/off tap close to the appliance.
Installation
- Take advantage of the adjustable feet (4) to posi-
tion the device at the desired height.
- Make the gas connection (10, CNG or LPG)
respecting the size of the pipe, remove any burrs
and internal impurities.
- Make the electrical connection: the power supply
accessory kit, avoids the replacement of batteries in
the receiver.
Before starting up the Device, check care-
fully:
- Keeping the Device;
- Performance and seal duct smoke outlet (if any);
- Shut-off function;
- Operation of pilot flame ignition;
- Main burner operation;
- Operation of thermocouples;
- Test of gas pressure to the nozzles, with micro-
manometer be inserted into the sockets 7 (exit)
and 8 (entry).
17
INSTALLER
