22
CUSTOMER SERVICE
Regolation
This appliance has one types of remote control
BASIC model
(supplied) with Off and flame increase
and decrease keys;
Once turned on, you can choose the power level of
the Device using the remote control.
- Press the remote button "
triangle DOWN
" to redu-
ce the intensity of the flame.
- Press "
triangle UP + SPARK
" to raise the intensity
of the flame.
The increase in the intensity of the flame
through the use of two keys is a safety fea-
ture designed by the manufacturer to avoid sud-
den and accidental blazes.
REPLACING THE BATTERIES
The remote-control unit and the receiver unit are
complete with batteries. To change these, remove
the shell of the respective compartments and change
them, being careful not to switch over the polarities.
Use 1 x 9V PP3 battery in the remote-control unit
and 4 x 1.5V AA in the receiver unit.
Replacement
- Remove all the wood or stones;
- Clean up and remove the cover plate;
- Remove the battery case;
The battery case with the supplied cable,
can be located away from the unit to allow
easy replacement of batteries.
- Remove the locking screw of the cover to access
the battery compartment;
- Replace the batteries;
- Reassemble in reverse order of removal.
The old batteries must be disposed of in
accordance with applicable regulations.
Do not remove the batteries using metal
tools as this could seriously damage the
electronic contacts.
Check annually the proper state of preserva-
tion and operation of the batteries to avoid
any leakage that might damage the contacts and
jeopardize the operation unit.
