iSys iTerra TL1290, Руководство пользователя

Страница: 18 / 44

16
STEP 9
STEP 10
To load the paper, press the load button
on the cart menu Open the cutter door and while using caution, carefully
remove the piece of cut paper. Close the cutter door
CAUTION: Do not place hands inside machine while
printing. Keep hands away from the cutter blade.
STEP 11
Close both of the cart doors. The printer will not print until
all doors are closed and the cart menu displays idle. Do
Not open any printer doors while printing.
Cart Menu Summary
Changing Menu Settings
1. To use the Menu you must first press offline.
2. Press Menu (far right button). Use the Arrow buttons to move up & down through menu items. Press Select
3. To choose a selection – press Select – you will see a pointer on the left margin that will blink. Press up or down arrow to
change options. Press Deselect to save changes (blinking will stop)
4. To Exit – scroll down to exit, then select.
**If at any time you need to re-boot the printer without turning the unit on and off by the rear power switch, press and hold the
middle button for >2 seconds. Printer will go into soft power off mode. Press middle button again (holding for >2 seconds) and
printer will perform reboot sequence.