Carefully place the device in the hole
, press in gently and rework with a spade
if necessary. Then
compact the soil around the device
.
Turn on the device.
Check the function of the device regularly. In case it does not work normally any
more, a replacement of the batteries might be necessary (see point 3).
Installation suggestion (see drawing):
Place the repeller in such a position that animals will have the possibility to flee
from your land.
After about 5-6 weeks the device/s should be moved approximately 4-5 metres in
the direction of the escape route.
ATTENTION:
Never plant the device directly into the mound. If you are using
several devices, never install them in the corners of the plot; you then contain the
animals in the middle and block their possible escape routes. Start repelling the
animals directly at the house and work your way toward the property boundaries.
In very dry and hard soil, drill a hole in the ground and compact the soil around
the rod. Look out for underground barriers, such as pipes, foundations, edges and
borders, and concrete slabs! These barriers reduce the spreading of the
frequency waves and their effectiveness.
