Consigne sur la protection de l´environnement
Ce produit ne doit pas être jeté dans vos ordures ménagères lorsqu´il parvient en
fin vie, mais doit être déposé dans un centre de collecte pour le recyclage
d´appareils électriques et électroniques. Le symbole indiqué sur le produit, dans
le mode d´emploi ou sur l´emballage le signale. Les matériaux sont réutilisables
selon leurs caractéristiques. Grâce au recyclage, à la réutilisation matérielle ou
toute autre forme de recyclage, vous contribuez considérablement à la protection
de notre environnement. Veuillez vous informer auprès de votre municipalité pour
connaître le centre de collecte compétent.
Instructions for Use
Vole Repeller - This appliance not only repels rodents,
ants and even snakes!
Article No. 70060
Dear Client,
Congratulations for choosing one of our quality products. Please follow these
instructions carefully and keep them with you.
Repel rodents through vibrations
– no chemicals, no ground pollution!
1. Product description
With this product you have a state-of-the-art rodent repelling device. Its extremely
sturdy design guarantees consistent durable operation. The device
alternately
generates quartz vibrations and strong vibrations
at intervals of about 25
seconds. In field trials, these specially generated vibrations produce an optimally
effective range of about 1,250 m² below ground or 200 m² on the surface. The
range can vary depending on the soil conditions. The innovative triangular shape
(triangle) sends the vibrations out perfectly in all directions. As the quartz
vibrations are unbearable to rodents, ants and snakes over an extended period,
they migrate to other areas after only a few days. Pets are not affected by the
frequencies. This
animal-repellent
device can be used in gardens, fields and
other outdoor locations where unwanted animals are found. This device repels
voles, moles, ants, snakes and similar soil animals living in the soil and above
ground.
2. Installation and maintenance
Plant the device up to ¾ deep into the soil. Make a cross in the ground with a
spade or dig a hole so that the product can be easily sunk into the ground. Open
up the cross by pushing it apart with the spade.
