25
Earthcore Industries
MAGNUM
Series Fireplace
25
10.
Position the second tier of smoke dome’s sloping
sidewalls at each end of the smoke dome components.
The sloping sidewalls fit in between the front and
rear smoke dome components and also fit into the
haunches at the ends of the front and rear smoke dome
components. Earthcore adhesive all contact surfaces
thoroughly. The smoke dome sloping sidewalls have a
beveled bottom edge so that they will sit tight onto the
flat top of the damper beam assembly.
(Figure 24)
11.
Set the top plates into position and Earthcore adhesive
on top of the smoke dome wall assembly.
One side of the top plate shows a thickened center.
This side is the bottom face.
The flue hole in the top plate is centered in the
smoke dome from side to side but is offset from front to
back, the center being ten and three-fourths inches (10
¾”) from the back of the firebox.
(Figure 25)
Assembly Instructions - MAGNUM
Part
#34
FIGURE 24
FIGURE 25
