24
Earthcore Industries
MAGNUM Series Fireplace
24
Assembly Instructions - MAGNUM
7.
Set the rear smoke dome components across the
damper beam in a bed of Earthcore adhesive and flush
with the back face of the back damper beam lintel.
Set the front smoke dome components in Earthcore
adhesive across the front damper beam and 2 -3/4 inches
back from the front of the front damper beam lintel. This
placement should create a space of 17 inches (17”)
between the front and rear smoke dome components.
(Figure 21
8.
Position the smoke dome’s sloping sidewalls at each
end of the smoke dome components.
The sloping sidewalls fit in between the front and
rear smoke dome components and also fit into the
haunches at the ends of the front and rear smoke dome
components. Earthcore adhesive all contact surfaces
thoroughly. The smoke dome sloping sidewalls have a
beveled bottom edge so that they will sit tight onto the
flat top of the damper beam assembly.
(Figure 22)
9.
Set the second tier of rear smoke dome components
across the top of the first tier of smoke dome components
with Earthcore adhesive between the two tiers. Making
sure both tiers are flush with one another.
Follow the same instructions of the second tier of
rear smoke dome components for the second tier of
front smoke dome components. This placement should
create a space of 17 inches (17”) between the front and
rear smoke dome components.
(Figure 23)
FIGURE 21
2 ¾”
Part #34
Part
#34
FIGURE 22
FIGURE 23
Smoke Dome - 1st Course:
84": Part# 17, 112, 17
96": Part# 16, 113, 17
108": Part# 16, 114, 16
120": Part# 16, 116, 16
Smoke Dome - 2nd Course:
84": Part# 16, 18
96": Part# 16, 110, 17
108": Part# 16, 111, 16
120": Part# 16, 115, 16
