Warnock Hersey Listing Label
- Facsimile -
6
Isokern Fireplace and Chimney Systems are tested and listed to UL standards: UL 127, ULC S610, and UL 103HT.
The listing label shown above outlines the listed clearances to combustibles and indicates that the units are
suitable for use with solid fuel or listed gas appliances. Refer to the manufacturer’s installation manual for detailed description of
clearances to combustibles and all other installation information. A metal listing label similar to that shown above is affixed to each
Standard EPA qualified fireplace. Do not remove the listing label from the Standard EPA qualified fireplace fireplace.
In addition, an EPA qualifying label will be affixed to the Catalytic Combustor system. Keep this label in a safe place if needed for
permits or building inspection. Prior to beginning installation, contact your local building official to determine the need to obtain a
permit.
MANUFACTURER:
EARTHCORE INDUSTRIES, LLC
MODEL NO:
Series 36 C
PARTICLE EMISSIONS:
2.93 GRAMS/KG OF WOOD BURNED
For proper operation, catalyst must be replaced every 3 to 5 years.
FIREPLACE
SMOKE EMISSIONS RANGE
Higher Emissions
Lower Emissions
0
12.0
THIS MODEL
EPA PHASE 2 EMISSIONS LEVEL
2.93
5.1
Better
Worse
U.S. Environmental Protection Agency
Wood-burning Fireplace Program
Phase 2 Qualified models are cleaner and pollute less than those models that
have not met this emissions level. Exposure to smoke has been associated with
respiratory illness and other health problems. Models that have lower smoke
emissions may reduce your risk.
PHASE 2 QUALIFIED
For more information go to www.epa.gov/burnwise
Fireplaces with lower emissions produce less smoke when installed and operated properly.
* EPA has determined, based on testing by an accredited independent laboratory and a certification
of conformity by a nationally recognized certification body, that this model qualifies at the Phase 2
emissions level for U.S. EPA's Voluntary Fireplace Program.
EPA Yellow Qualifying Hangtag
