Isokern EPA Qualified 36 C Скачать руководство пользователя страница 18

Catalytic Combustor Warranty

18

 

Clear Skies warranty obligations for the HearthCAT Emissions Control System are limited to the 

terms set forth below: Clear Skies Unlimited, Inc. (“Clear Skies”) warrants to the consumer who purchases 

a new solid fuel burning fireplace containing a HearthCAT Emission Control System as a new component, 

to replace the catalyst at no charge should it cease to function within three years from the date of purchase. 

The HearthCAT Catalytic Component is designed to perform efficiently for three years of fireplace 

operation. ONLY recommended fuels should be burned. Follow the fueling directions in manufacturers 

operating manual. For warranty purposes, proof of fireplace or HearthCAT™ purchase is required. Labor 

for removal and/or re-installation of the catalytic component is not the responsibility of the manufacturer.

This warranty applies only to CS-100 Series HearthCAT™ catalytic components manufactured by Clear 

Skies Unlimited Inc. For replacement of a Clear Skies catalytic combustor under the conditions of this 

warranty, please contact the manufacturer @ www.clearskiesunlimited.com 

NEITHER CLEAR SKIES UNLIMITED INC. NOR THE DEALER WHO SELLS THE HEARTHCAT™ 

EMISSION CONTROL SYSTEM IS RESPONSIBLE FOR INDIRECT, INCIDENTAL, SPECIAL, 

PUNITIVE OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE IMPROPER USE OF THIS 

PRODUCT OR THE CONTINUED USE OF THIS PRODUCT BEYOUND THE REQUIRED 

REPLACEMENT PERIOD. 

Содержание EPA Qualified 36 C




















Отзывы: