IMPORTANT
:
1.
Recharge the unit after each use. Use only the supplied AC charger and cords or a
KEMAX
battery
charger to recharge the jump starter. If you must use a DC power source, do not charge for more
than four hours to prevent battery damage.
2.
Make sure the jump starter is OFF before commencing to charge.
3.
Use only
KEMAX
accessories with this product.
NEVER
put anything into the power socket except
the cords supplied with this product.
4.
This product is not to be used with other products that draw more than 20 Amps.
5.
For use with 12V DC battery systems only. Do not attempt to use with any other types of batteries.
6.
DO NOT
use this in place of your vehicle battery. This product is for jump starting only. It does not
replace a dead battery.
7.
If the vehicle to be jump started has an on-board computer system, check the owner’s manual before
attempting to jump start the engine. Jump starting with this unit may cause damage to some
computer systems.
8.
Protect this product from moisture, excessive heat or direct sunlight.
9.
Keep the unit upright at all times.
10.
Make sure all parts are in proper working order before each use. Replace damaged parts
immediately only with original
KEMAX
replacement parts.
11.
NEVER
jump start a frozen battery.
12.
Do not crank the vehicle’s engine excessively. If the vehicle will not start after several attempts, the
problem may be something other than the battery. Stop jump starting and look for other causes.
13.
Never over-inflate tyres or other items.
EMERGENCY FIRST AID
Acid in eyes
:
Flush immediately with cold running water. Continue flushing for at least 20 minutes, then seek immediate
medical attention.
Acid on skin
:
Wash the affected area immediately with soap and water. If the skin becomes red, sore or irritated, seek
immediate medical attention.
Jump Starter Manual V. 12.1
8
