13
Config setting menu.
PVR File Format:
Set the format of record files (MPEG2 files), TS or PS.
l
File Size:
Set the size of a single record file.
l
Preferred Storage:
Select a preferred storage device among USB devices and Card.
l
Timeshift:
Set a method to start the timeshift function. Three options: Auto, Pause
and Off.
l
Timeshift Length:
Set the timeshift length. Four options: Auto, 30min, 1hr and 2hr.
When disk is full, the earlier data will be overwritten and it is not limited by this parameter’s
setting. This setting is unavailable when Timeshift is set as ‘Off’.
l
Timeshift to Record:
Set that during timeshift if you press REC key the system will
whether or not to record the data that have been buffered by timeshift. If On is selected,
after you press REC key the data that have been buffered by timeshift will be saved into a
file. If Off is selected, the buffered data will be removed when the timeshift end.S
7 Setting
Through the Setting menu you can configure
and upgrade the system. After entering the
Setting
menu,
the
following
interface
appears:
7.1 Timers
Through the Timers item, you can manage
scheduled programs. In the Timers menu you
can view and edit the scheduled program’s
name, start time, schedule type and so on.
See the figure below:
In the above figure the fields from left to right
are: Timer No., Program Name, Date, Time,
Mode and Type.
Program Name
indicates
the scheduled program.
Data
and
Time
indicate the scheduled time.
Mode
indicates
the schedule mode: Once, Daily, Weekly or Monthly.
Type
indicates the behaviors
after the scheduled time is reached.
In this list, you can -
l
Press the red function key to delete all timers in the list.
l
Press the green function key to delete the selected timer.
l
Press the yellow function key or ENTER key to edit the selected timer. The following
edit menu will appear.
