iSMA CONTROLLI BACnet iSMA-B-MINI Скачать руководство пользователя страница 61

Страница: 61 / 114

iSMA-B-MINI/MIX BACnet User Manual

www.ismacontrolli.com

DMP261en | 1st Issue rev. 8 | 05/2022

page 61 of 114

Figure 41. The cooling mode algorithm

8.6.3 MODE TIME Object (Analog Value: 26-29)

This object contains the time value for TIME RELAY modes. The time unit depends on the

selected mode: milliseconds or seconds.

8.6.4 COMMAND Object (Binary Value: 12-15)

The module includes special COMMAND objects. The command objects are used to

remotely execute the action (simulate light switch/PIR). The action is executed by

changing the state of the object from false to true. All special application modes can be

executed except for input forwarding, heating and cooling modes.

8.6.5 BLOCKING Object (Binary Value: 8-11)

The BLOCKING objects are used to block physical input signals from the control logic (all

modes excluding heating/cooling mode). By setting true value on the relevant object, the

module blocks the input, and no action will be executed. Setting false value restores

normal operation. The block input function does not work if the heating/cooling input

mode is set.

8.6.6 SETPOINT Object (Analog Value: 30-33)

The SETPOINT objects contain values which are used in heating/cooling modes (4U4O-H

and 4U4O-H-IP only) as the setpoints for heating/cooling control algorithm.
The default Setpoint value is

21.

WARNING!

In case if the temperature sensor fails (if it is disconnected or shorted), the heating

mode does not work, and the output remains in the false state.

Содержание BACnet iSMA-B-MINI



















































































































Результаты поиска

Содержание BACnet iSMA-B-MINI

Отзывы:

Похожие инструкции для BACnet iSMA-B-MINI

Бренды по названию

Популярные бренды

iSMA CONTROLLI BACnet iSMA-B-MINI, Руководство пользователя

Результаты поиска

Содержание BACnet iSMA-B-MINI

Отзывы:

Похожие инструкции для BACnet iSMA-B-MINI

Бренды по названию

Популярные бренды